ETA eHACK Sophisticated and innovative
Nothing gets stuck: this boiler uses all types of chopped wood – whether it is forest or recycled wood residues – everything is burned without problems. Wood chips up to G50/P31S are transported by a screw conveyor without jamming. If an obstacle occurs – the screws automatically start to rotate backwards, releasing the jam. The patented single-chamber shutter is made with attached blades that cut off wood chips that are too long. The shutter is sealed, which ensures that the fire does not spread to the fuel tract. As an option, by purchasing a recirculation damper drive, the boiler can burn pellets and wood waste from joinery production.
ePE-K - solidly built boiler
Designed for higher loads. Tried and tested as a prototype of the ETA wood chip boiler, optimized with specially adapted flue gas recirculation. The combustion chamber temperature is maintained between 800÷1000 0C, without reaching the melting point of wood ash, so the grates remain clean; no slag forms on them.
Lengvai pritaikomas Katilas (Pellets Compact) PC 20-100 kW
Model power scale: 20, 25, 32, 40, 45, 50, 60, 70, 80, 100 and 105 kW
Designed for compact installation. It is equipped with:
High-efficiency pump and mixing valve,
All valves necessary for safe operation – safety valve, automatic air vent valve, etc.,
Bypass line for boilers up to 50 kW, operating without an accumulator tank
Possibility of installing the boiler against the wall (up to 50 kW) – connections on the side or top of the boiler
High efficiency is achieved
Convenient to use
Ideal for combination with storage tanks
Backfire protection using a sluice gate
Automatic cleaning of the heat exchanger (with the help of turbulators)
Automatically rotating combustion grates
Lambda probe,
Automatic boot-up
Stainless steel combustion chamber for high combustion temperature and good combustion conditions ,
Fully automated ash removal into a removable ash bin
Full control of the heating system via computer, tablet or smartphone.
Boiler ETA PU For building, connecting - ready
A compact boiler for small boiler rooms, utility rooms, storerooms or rooms with ventilation of living rooms. Thanks to the fact that the air for combustion can be supplied separately from the air for ventilation, the PU boiler can be installed almost anywhere. And you can always find a place to store pellets somewhere nearby. An area of 1.6+x1.6 or 2.5×1 meter is sufficient for installation. The ETAbox pellet storage tank (also an underground tank) is also a good alternative. The boiler is controlled by a touch screen controller or a mobile phone, tablet. The boiler is equipped with a fireproof sluice gate for pellet feeding, the economy of the combustion process is supported by automatic cleaning of the heat exchanger surfaces, automatic ignition, and control of the combustion process with a λ-probe.
Small space requirement thanks to compact design. Integrate into the boiler:
Possibility of installing the boiler close to the wall:
Protection against fire spreading to the fuel storage
Ensuring the useful operation of the boiler thanks to
Many other advantages
pump, mixing valve for one heating circuit; possibility of installing additional heating circuit control according to customer needs.
All valves for safe boiler operation are installed, as well as an expansion vessel, safety valve, automatic air vent,
Return water temperature maintenance valve and valve for hot water preparation
All connection points are located on the side and top of the boiler.
installed with a shutter
Automatic cleaning of the heat exchanger surfaces with moving turbulators
Revolving grates
Lambda probe
Automatic start-up
Stainless steel combustion chamber for high temperatures and better fuel combustion.
Fully automated ash emptying into a removable box.
Full control of the heating system
With the help of a touch screen and an easy-to-understand user interface.
ETA HACK VR Large universal
Whether we burn chopped wood or pellets – the internal equipment of this boiler with a moving hearth has everything you need for safe, clean and flexible heating. Flue gas recirculation is constantly monitored. This evens out the flue gas flow. The hearth is better cooled, the temperature in the boiler remains in a stable range, which, on the one hand, ensures complete combustion of the corresponding fuel, on the other hand, prevents the formation of slag deposits. The rarefaction monitoring in the fuel ensures safety; while lambda control ensures the highest NEC with the lowest emission pollution. The absolutely reliable fuel supply and dust separator – multicyclone system enables the operation of the unit with the greatest convenience.
Model power scale:
Advantages
Convenient boiler assembly thanks to:
250, 333, 350, 463, 500 kW
Multilayer design,
high-temperature combustion chamber with a moving grate,
a reliable system for preventing backfire into the fuel feed system, enabled by a patented single-chamber sluice shut-off mechanism.
independently controlled flue gas recirculation,
fully automated cleaning of vertical heat exchanger pipes,
dust particle separation in an integrated multicyclone,
lambda sensor and temperature regulation in the combustion chamber,
continuous monitoring of combustion chamber vacuum,
a powerful yet energy-efficient flue gas fan,
individually configurable ash removal system,
complete control of the heating system via a touchscreen and an intuitive user interface, both locally and remotely.
Convenient boiler assembly thanks to: factory installation of the boiler cable dallies
mechanical separation of the package and the heat exchanger, which facilitates transport of the boiler into the boiler room
ETA ePE BW There are no smaller ones!
Užimdamas mažiau kaip 0,5 m2 pastatymo plotą, ETA ePE BW yra mažiausias kondensacinis aukštos technologijos katilas rinkoje su integruota hidraulika ir elektrostatiniu dalelių nusėsdintuvu.
ETA ePE BW yra idealus granulinis katilas naujakuriams ir rekonstruojantiems būstą (žematemperatūriniai katilai su grįžtamojo srauto temperatūra 35 0C) vienbučiuose ar daugiabučiuose namuose.
Visa katilinės įranga sumontuota kompaktiškame katile. Aukšto efektyvumo siurblys, saugos jungtys, šilumokaitis ir kiti komponenetai užtikrina katilo darbą kondensaciniame režime.Tai įgalina panaudoti likutinę šilumą dūmuose, tuo būdu didindama katilo efektyvumą.
Be to, katilas turi galimybė prisijungti antrą šildymo grandinę.With a footprint of less than 0.5 m2, the ETA ePE BW is the smallest high-tech condensing boiler on the market with integrated hydraulics and electrostatic precipitator.
The ETA ePE BW is the ideal pellet boiler for new-builders and those renovating their homes (low-temperature boilers with a return temperature of 35 0C) in single-family or multi-family houses.
All boiler equipment is installed in a compact boiler. A high-efficiency pump, safety connections, heat exchanger and other components ensure that the boiler operates in condensing mode. This enables the use of residual heat in the flue gas, thereby increasing the boiler’s efficiency.
In addition, the boiler has the option of connecting a second heating circuit.
Model power scale:
Advantages
Easy boiler assembly thanks to:
6,6-22 kW
Suitable for both new and existing buildings due to optimal integration options with the existing heating system.
Possibility to install an integrated electrostatic particle precipitator in the boiler to minimize emissions.
Flue gas ducts and water connections are easily adaptable to existing interfaces.
Fully automatic ash removal into the internal ash container.
A tested and certified backfire prevention valve ensures the highest safety level.
The combustion chamber is equipped with patented grates and cleaning “combs” to ensure optimal combustion and efficient ash removal.
A condensing heat exchanger made of special stainless steel enables maximum efficiency.
Combustion air can be supplied from adjacent rooms.
7″ display according to ETA standards for boiler monitoring and control.
Remote boiler control via the meinETA platform.
optionally integrated electrostatic filter
universal connection points for flue gas and piping systems